The rototiller project is officially: No more! I just sold the motor for a profit and I will re-list the tiller base a little later. The Gudenaa mower I picked for free also sold today, and is being picked up tomorrow. Now I have to get going welding up the other mowers I have!
Our property is infested with voles, mice and what-not; leaving tunnels and holes all over the place. We have just staked out some frequency oscillators that are supposed to help get rid of everything like this in the ground and surface. I also bought a couple of live traps that I’ve set out, but they have only caught 1 in 3 days. The latching mechanism needs adjusting or modifying, because the last two days the bait has been stolen and the traps were not set off.
I have set the live catch traps, because I don’t mind relocating them in stead of destroying them. The one I have caught was released close to one of the oscillators, to see the effect. The mouse seemed to be disorientated and I guess that’s exactly what it’s supposed to do.
Today is a quiet day, normally, and I am not playing with any motorized equipment. Had to do something though, so decided to assemble a work table I bought the other day. It’s one of those simple and small, raise/lower (manually), tables that has room for tools.
15 minutes and the thing was together, didn’t even need the guide 👅 One of our neighbors decided to start the chainsaw and do some yard work, and I figured what the heck.. I’ll pull on the recently added mower! I pulled twice to see that it turned and had compression and then primed the carb like 4 times. Two more pulls and the thing fired right up 🔥 Ran impressively clean and silent and the self propelling worked like a charm. All that’s really wrong is the gas lever is broken, but I have a quick fix for that in mind (video coming real soon).
Once I’ve cleaned out the grass and dirt that was in the mower and collector, and given it a nice power wash; I’ll list it for sale at like ~$110 or so and accept a tad lower if offered 💵
A preface; I suffer from tough migraines, and today was not a good day. I did work my day job, but had to lie down after, to recoup. A couple of hours rest and I felt like doing a simple afternoon project.
A while back (before the big Covid outbreak) I picked up a kitchen table with extensions, to use as a work bench/surface. A couple of weeks back I also picked up a 1m x 1m sheet of cold rolled steel, to use in projects. Now, because of the new welder, I decided I wanted to have a metal surface/work bench to use as a welding table, and this was right in my mind. Had to cut a bit off the sheet, but an angle grinder and a cut off wheel did that job easy.
All in all I spent under 30 minutes on this, and now I have a great working surface to also weld on. The table can no longer “fold” together, but I don’t mind. Not in my use anyways.
Right now, I sitting here waiting for a confirmation on a new pickup it looks like I scored. It was listed for free, I jumped right on it, but the seller said it was gone in under a minute. Then, while working on the table, I got a message “He reconsidered and didn’t want it. You still interested?”. I answered Yes right away, but for almost an hour now there’s not been a confirmation. Might have to wait and pick up tomorrow, or I might have to pass as well ✋
Update; Got the go-ahead to pick up the mower, an address about 25 minutes from me. Was told it was set outside the gate, and to just pick it up. Drove to where the GPS told me, but couldn’t find a house number and certainly no mower outside a gate. A BIG drive around to get back into this one way street, and by chance I saw a guy with a mower that matched the pictures… Stopped and sure enough, it was the one.
The guy told me it was one that was left at the house he bought, and that he had put fresh gas in it and pulled, but no luck. That’s fine and dandy and I can’t wait to dig in. Now, tomorrow is Ascension Day, so no day job and probably no noisy work outside (no starting of mower) but I might just do some welding, because the weather has warmed up nice 😃
So.. As you might have read before, I am always on the lookout for new (and free) stuff. Any time something that catches my eye appears, I jump on it. Yesterday was May 17th (Norways Constitution Day) and not much was posted. Today has been a bit better, but still quiet though. One ad was for two kids bikes and I was first in line 😊 I haven’t really gone over them yet, but the once over of breaks and gears seems fine. A wash and a bit of lube and they’re out for sale. Flipping is a thing for me.
This is what I have out, and I also have my “boneyard” where I have some old lawnmowers and engines, but they’re overgrown and in desperat need of repair. IF ONLY THE WEATHER WOULD WARM UP!!! It is forecast warmer to the end of the week though, so could be better. I want to test my new welder, but it’s still a bit too 🥶
Picked up a kids bike the other day, painted pink over black paint. The painting is done without prepping, so it’s flaking off, but I don’t mind as it’s not going to be a bike anyways.
Yesterday I picked up a “new” mower and the whole story is kind of weird… I jumped on a listing (Tuesday) on Finn, advertising a Partner lawnmower for free, and it’s almost identical to the beater we run at home. 10-15 minutes later, I got a reply from the seller saying I got it and that she was heading out, but would leave the mower outside her garage and I could pick it up there. I told her thank you and that I would start right away. Got in the car and plotted the GPS then set off. 5 minutes later I got a notification from Finn on my iWatch, and it was the seller saying: “Sorry, the mower’s not mine; have to check with my daughter. Wait until tomorrow!” Turned around and told her we’d check back Wednesday. Wednesday came and I asked if she had heard from her daughter. She confirmed and said once more that I could pick it up outside her garage. This time, no correction so a while later the mower is home with me; BUT!
It’s not really visible in these pictures (check the video below) but if you look to the left of the Partner logo on the yellow cover, you see a hole and a “line”. This mower is almost split in half! Needs a fair bit of welding, but that’s quite alright since I have a new welder and all.
Now for the weather. It’s so cold outside, the other day we had snow in the air!!! Almost in the middle of May, and there’s snow..?? It’s not the first time that happens, but I don’t like it. I am currently waiting for a bit of warmth so I can work outside in the evenings. Wish I had a garage or a workshop where I could stay warm and still have plenty of room to work 🍀
I watch a lot of YouTube videos, and I see so many videos from yard sales, garage sales and what not. This is not a thing here in Norway, and certainly not anything like town wide yard sales… The only thing here is Finn.no (sort of like Craigslist) and watching the free listings like a hawk! I have alerts on anything that’s posted for free in my area, and that is 98% where I get my “new” stuff.
However; Any time any motorized equipment is listed, you have to be quick. You have to contact the seller within a minute, maybe two, if you want to be lucky. Yesterday I was notified of a free lawnmower, and I had sent a message to the seller in under a minute. I was still not the first one! I also have a listing on Finn, where I tell people I pick up motorized equipment, if they’re getting rid of it. That way they don’t have to go to the trouble of driving it to the dump, which is usually what happens.
This video is from yesterday, showing the items I picked and also a few of my listings that’s being flipped.
The Husqvarna mower I picked up yesterday, is from the listing I have of picking up equipment. I don’t get a whole lot that way, but occasionally. It needs a bit of work, new pull chord, new throttle lever, new governor spring and work on the propulsion. For now, I’m setting it aside, because I just can’t get new parts over here. I ordered a carb kit from the USA, in early March and it got here this Friday!!! Two months, all because of Covid-19.
Another thing I’ve realized is: because of Covid-19, I might struggle to get more gas for my brand new welder when I run out. All Jula’s in Norway are out of the refill option, but one of the stores semi-close to me has one bottle left. Luckily, the tank holds 2500 liters of gas, so I’m set for a good while.
Now, I’m just waiting for it to dry up a bit from last nights shower. I want to get out to work on my stuff. I noticed that there is an issue with the gears on the Diamant bike I picked up. I think the wire is too loose, but I’m not sure. It’s one of those old 3-speed gears that are locked in the back wheel. Never worked on one of those, but I’ll figure something out 😃
A couple of weeks back, I jumped on a listing on Finn. It was for two bikes (for youths) and it was only a 10 minute drive from me. The seller got a number of people requesting them, as they were for free, but I managed to be the first one. All of 25 minutes I was out, picked them up and was back home. One of the bikes was in pretty good shape and one needs some brake work.
The brand is Velosa I think, or if that’s the model, I don’t know. Put it up in my stand and gave it the once-over. Lubed up the chain, adjusted the gears and checked the brakes. I spent less than 15 minutes working on it, and I’ve listed it back on Finn. Listed for ~$60, but I’ll accepts ~$40.
Next project today, not including the other bike, is welding the lawnmower that needs it with my brand new welder 👨🏭 It’s been a busy day at work (although I do work from home) so I’m not sure I’ll get to the mower until tomorrow. It’s also a bit windy outside, so filming might be problematic.
Oh, and I also listed my old flux core welder for sale, hoping to recoup a little from the expense of the new welder. Just listed though so have to wait a few days probably.
This is the welder I’ve been using, and it’s still the original spool of wire in the machine. I listed it for ~$100 but I will accept a tad lower. Also included is a new and full spool of wire.
I am just enough of a couch potato, that when it’s bad weather I’m inside 😂 I wish I was outside, because I want to flip the bikes I picked up the other day, but it’s cold and damp and I’m instead watching learning videos when I’m not working my day job.
There hasn’t been any good items up for grabs either, so I haven’t been out for a pickup since the bikes. There was two tillers up for sale, but I didn’t catch any of them until someone else had picked them up… There are loads of items listed every day, but nothing that I can make an easy profit on. Chairs, tables, couches, misc. kitchen items, and so much more, but; Not for me.
Just checked the forecast for tomorrow (which is a Holliday) and it just might be enough of a clear up that I could venture outside and have a gander on the bikes. Let’s hope so!
Just shot a quick video, posting some thoughts and such.
I picked up a couple of bikes today, got them for free. I’m planning on spending a couple of hours on them to make sure gears and brakes work fine and that tires have and hold air. Then flipping them for a few hundred kroners, something like ~$50-60 or thereabouts.
I’d love for you to check out my YouTube channel (link opens in new window). Make sure to subscribe and ring the bell, to get notified of new uploads. I love reading comments, so comment and let’s have some fun!
My search for items in the giveaway section yielded another score the other afternoon. A Mantis 2-cycle tiller was given away and I managed to be first in the running, and went and picked it up. Another one hour pickup, and it was in a non-running state, unknown what the issue was. I got it home and quickly realized that it was the pull start assembly not engaging the flywheel. Pulled the assy off and noticed that it seems to be missing a part between the pull chord and the flywheel.
While unscrewing the pull start, the screws were loose so it was clear somebody had been in there. I imagine they lost the part in question and just put it away. Turned the flywheel and the motor spins nice, and it seems to have excellent compression. I could start it with a drill or something, but I figured I’d just post it for sale and see what I get. Posted it yesterday and and today a guy contacted me. I posted it for ~$70 or best offer, and I’m prepared to accept lower. Still nice profit for a free item. I could try and locate the part missing, but again it’s hard to get parts to Norway, so I’m letting it go.
Another item that’s up for sale is the rototiller project. If I get a decent offer, I’m giving the profit towards a new or better used tiller for the garden. I pooled the motor, tiller base, pulley and boss together for ~$200 or best offer. Going to be interesting to see if someone bites on that one. The motor alone is a good piece of equipment, just needs a cleaning and lube, and of course an oil change and service. Something I could do myself, but I have a few lawnmowers I’m putting some time into and if I get them running (been outside a couple of seasons) more going out for sale.