Clearing up outside and prepping some #art

It’s been raining for some days now, but finally stopped and the forecast is for better weather. It’s still to wet outside to do anything really, but it is drying up. Since I bought the new welder and gas tank and up until now, I have been lugging both things by hand (to my backs dismay) outside. Yesterday I figured: NO MORE! I have been looking at a welding cart online and finally went and bought it. It comes, assembly required, and I spent a good half hour on that yesterday morning. I was also struggling with a migraine but managed to pull through though.

I have started decorating my helmet with stickers, so if you have some you want to send me, I’d very much appreciate it! Get in touch:

On the flip side, I got rid of a bike and let it go for ~$60. It was used like twice and then stored inside for years, so I just let it go. Haven’t picked up anything in days now, but I have started listing some items back on eBay again, link to my eBay store. I only wish shipping outside of Norway (and inside too…) wasn’t so expensive. It makes selling items to the world hard, because of the price.

Since I can’t go out welding, I have started thinking about projects I’m doing once I can, and today I started a project I thought of while in bed the other night. I struggle to sleep and often lay awake for hours before finally falling asleep. I don’t have too much material I can use yet, as I’ve just started thinking about these things, but I did pick up some stainless steel wire I wanted to use.

A clipper, a plier, a bolt and some wire – Turns into something winged.
I’m not sure I can manage to weld this up with my current skill level, but it sure will be fun to try 😆 . The wings are getting more embellishment also, but I won’t do that until the welder is out.

Got ideas for me? Leave me a comment below or send me an e-mail (address above).

Stuck inside

We needed a bit of rain now, the fire hazard was huge and the plants were drying out. However, as I don’t yet have my inside workspace, I am stuck inside and can’t bring the ideas I have to life.

Instead though, I am taking the time after my day job to search for flips and listing flips online. I posted about some DVDs I got for free and haven’t yet gone through all of them. I did find two items I now have listed on my eBay store! Chris Rock, Bigger Blacker and the action movie Wanted! Both are listed as auctions, and both start at just $1. I also listed a Kodak EK160-EF instant camera, starting at just $9.

First time in almost a year that I’ve listed something on eBay. I think I might start using eBay more the coming time, as the international market is way bigger than posting for Norwegians on… Facebook Marketplace is another option I’m considering, and I might try a project of matching them against each other.

Now I want the rain to cease and the temperature in the range of 15 deg. C. That way I can get outside and take apart the things I need to in order to create the things I have in mind.

Things are moving and some trapping

The rototiller project is officially: No more! I just sold the motor for a profit and I will re-list the tiller base a little later. The Gudenaa mower I picked for free also sold today, and is being picked up tomorrow. Now I have to get going welding up the other mowers I have!

Our property is infested with voles, mice and what-not; leaving tunnels and holes all over the place. We have just staked out some frequency oscillators that are supposed to help get rid of everything like this in the ground and surface. I also bought a couple of live traps that I’ve set out, but they have only caught 1 in 3 days. The latching mechanism needs adjusting or modifying, because the last two days the bait has been stolen and the traps were not set off.

I have set the live catch traps, because I don’t mind relocating them in stead of destroying them. The one I have caught was released close to one of the oscillators, to see the effect. The mouse seemed to be disorientated and I guess that’s exactly what it’s supposed to do.

More for the hoard (and flip)

So.. As you might have read before, I am always on the lookout for new (and free) stuff. Any time something that catches my eye appears, I jump on it. Yesterday was May 17th (Norways Constitution Day) and not much was posted. Today has been a bit better, but still quiet though. One ad was for two kids bikes and I was first in line 😊 I haven’t really gone over them yet, but the once over of breaks and gears seems fine. A wash and a bit of lube and they’re out for sale. Flipping is a thing for me.

This is what I have out, and I also have my “boneyard” where I have some old lawnmowers and engines, but they’re overgrown and in desperat need of repair. IF ONLY THE WEATHER WOULD WARM UP!!! It is forecast warmer to the end of the week though, so could be better. I want to test my new welder, but it’s still a bit too 🥶

Free bike, flip

A couple of weeks back, I jumped on a listing on Finn. It was for two bikes (for youths) and it was only a 10 minute drive from me. The seller got a number of people requesting them, as they were for free, but I managed to be the first one. All of 25 minutes I was out, picked them up and was back home. One of the bikes was in pretty good shape and one needs some brake work.

The brand is Velosa I think, or if that’s the model, I don’t know. Put it up in my stand and gave it the once-over. Lubed up the chain, adjusted the gears and checked the brakes. I spent less than 15 minutes working on it, and I’ve listed it back on Finn.
Listed for ~$60, but I’ll accepts ~$40.

Next project today, not including the other bike, is welding the lawnmower that needs it with my brand new welder 👨‍🏭 It’s been a busy day at work (although I do work from home) so I’m not sure I’ll get to the mower until tomorrow. It’s also a bit windy outside, so filming might be problematic.

Oh, and I also listed my old flux core welder for sale, hoping to recoup a little from the expense of the new welder. Just listed though so have to wait a few days probably.

This is the welder I’ve been using, and it’s still the original spool of wire in the machine. I listed it for ~$100 but I will accept a tad lower. Also included is a new and full spool of wire.

Bad weather!

I am just enough of a couch potato, that when it’s bad weather I’m inside 😂 I wish I was outside, because I want to flip the bikes I picked up the other day, but it’s cold and damp and I’m instead watching learning videos when I’m not working my day job.

There hasn’t been any good items up for grabs either, so I haven’t been out for a pickup since the bikes. There was two tillers up for sale, but I didn’t catch any of them until someone else had picked them up… There are loads of items listed every day, but nothing that I can make an easy profit on. Chairs, tables, couches, misc. kitchen items, and so much more, but; Not for me.

Just checked the forecast for tomorrow (which is a Holliday) and it just might be enough of a clear up that I could venture outside and have a gander on the bikes. Let’s hope so!

Apr. 28 2020 – Update; More flips

Just shot a quick video, posting some thoughts and such.

I picked up a couple of bikes today, got them for free. I’m planning on spending a couple of hours on them to make sure gears and brakes work fine and that tires have and hold air. Then flipping them for a few hundred kroners, something like ~$50-60 or thereabouts.

I’d love for you to check out my YouTube channel (link opens in new window). Make sure to subscribe and ring the bell, to get notified of new uploads. I love reading comments, so comment and let’s have some fun!

First post in almost two years?

So.. I have neglected this site for a very long time, but today I figured I’d post a quick one on the latest video I made. I got this project for free, all I had to do was hook up my trailer and go pick it up.

It wasn’t very far from me and the whole pickup took just over an hour from start to finish. I made this quick video and did a very quick diagnostic, looking at what it would need.
Because of this whole Covid-19 thing, it’s very hard to get shipments into Norway (I’m still waiting on parts ordered months ago) and this made me think of flipping it.

I took some decent pictures and put it on (sort of like Norways Craigslist). I got an offer of ~$120 and he wanted to pick up in an hour. I took it and told him to come. Two hours later, a no-show, and I contacted him back. Told me he couldn’t make it that night, but wanted to postpone to the next day. I said OK, but that I would need confirmation early the next day, to get a specific time.

Mid day, next day, I heard nothing from the first guy but had gotten another offer (better) so I called the first guy up. He was almost 10 hours away, on another pickup so he couldn’t make it that day either. I told him I had to let it go if he couldn’t make it but that I would sell it to him for the original offer if he could arrange pick up. He said he couldn’t and that I could sell to the next guy. Just over an hour later, the second guy showed up and we lifted it onto his trailer.

I got just over ~$160 for my trouble and I am putting that into finding a better starting point for a project. I still have active searches going and get notified every time there is something interesting given away for free.

I won’t say I make much money on stuff like this, but I find it refreshing every time I make a dime or two.