The weather is warm, the back is … OK … and it’s time to weld! I have done some research on my machine and on welding with shielding gas and felt that today is the day 😊 I grabbed a couple of thick pieces of steel and carried all the gear outside. And one thing is obvious to me now; I need a welding cart!!!!! Carrying the welder, gas and gear out and in all the time is a pain in the a%$!
The first thing was to try the welder, and I spent 10-15 minutes playing around with settings and welding. I could get penetration, but the “seam” was tall, and if I turned the welder over 2 (of 4) on the heat, the fuze kept breaking. I need a bigger circuit as well looks like.
I measured and cut a piece of steel for the first weld and tacked it in place. Adjusted the welder and actually think I did pretty well, for a first time in 20 years.
The second piece was actually a lot better and easier, and I think it looks alright 🤔 Both surfaces are now primed with anti-rust rattle can paint and gets a black coating tomorrow or something.
If I weren’t so knackered I’d take a drive and buy the cart tonight, but I think tomorrow is better even though it’s Whit weekend. Oh, and I need to find a good supply of steel. I pay between ~$50 and ~$60 for a sheet of 1m x 1m cold rolled 1mm steel. Pricey!
OK, now I’ve gone and done it….. For years (ever since I was in school) I have made due with a simple flux core welder. It has been a pain in almost every way I’ve used it, but I just haven’t taken the plunge and bought a real welder. The bottom line has been gas (Argon) because the “bottles” have been crazy expensive.
A couple of weeks back, I found that a local warehouse (Jula) sells gas in a bottle they call Mini Bertha! 300bar 2500 liters of gas, and a bottle you own. All for the semi-nice price of ~$550 and when empty you exchange the whole thing for ~$100. That is a whole lot cheaper than the other places you get gas here. There you most of the time have to rent the bottles and keep up payments.
Now, I’m the proud owner of an ESAB Origo C141 MIG welder and a Mini Bertha with 2500+ liters of gas. That should hold me for a good while 😃
Next thing in that area now, is finding a supply of steel. I have a store that sells to private people, but I bought a sheet (1meter x 1meter) and it was ~$50! Along came some off-cut pieces I plan to use in installations I make (hobby) and some pieces were big enough to be used to fix other stuff. I have a lawnmower that needs a plate welded to it.
Under, you can view the video I made while rebuilding the garden trailer for my mother. I forgot to film the start of the project, which included the pain that was welding the mount.
This is a new (to me) way of filming and I am still learning the ropes. I promise to try my best at getting better, and I would very much like for you to visit my channel and get in on commenting, liking (or disliking) and of course subscribing to my uploads.