Just shot a quick video, posting some thoughts and such.
I picked up a couple of bikes today, got them for free. I’m planning on spending a couple of hours on them to make sure gears and brakes work fine and that tires have and hold air. Then flipping them for a few hundred kroners, something like ~$50-60 or thereabouts.
I’d love for you to check out my YouTube channel (link opens in new window). Make sure to subscribe and ring the bell, to get notified of new uploads. I love reading comments, so comment and let’s have some fun!
My search for items in the giveaway section yielded another score the other afternoon. A Mantis 2-cycle tiller was given away and I managed to be first in the running, and went and picked it up. Another one hour pickup, and it was in a non-running state, unknown what the issue was. I got it home and quickly realized that it was the pull start assembly not engaging the flywheel. Pulled the assy off and noticed that it seems to be missing a part between the pull chord and the flywheel.
While unscrewing the pull start, the screws were loose so it was clear somebody had been in there. I imagine they lost the part in question and just put it away. Turned the flywheel and the motor spins nice, and it seems to have excellent compression. I could start it with a drill or something, but I figured I’d just post it for sale and see what I get. Posted it yesterday and and today a guy contacted me. I posted it for ~$70 or best offer, and I’m prepared to accept lower. Still nice profit for a free item. I could try and locate the part missing, but again it’s hard to get parts to Norway, so I’m letting it go.
Another item that’s up for sale is the rototiller project. If I get a decent offer, I’m giving the profit towards a new or better used tiller for the garden. I pooled the motor, tiller base, pulley and boss together for ~$200 or best offer. Going to be interesting to see if someone bites on that one. The motor alone is a good piece of equipment, just needs a cleaning and lube, and of course an oil change and service. Something I could do myself, but I have a few lawnmowers I’m putting some time into and if I get them running (been outside a couple of seasons) more going out for sale.
Over a decade ago, my mother was given a rototiller from a family friend, and it was an old thing that actually required leaded fuel! It worked great the first few years, as long as we bought an addition to be mixed with the unleaded fuel.
Then, it just stopped working and the engine was nothing to save. It has been sitting for many, many years but it’s time to try and get it going again. A couple of years ago I put a lawnmower engine on it, but that was a bust. To get that to work, I would have to swap out the flywheel on the motor… If you have a look at my YouTube channel, you can see a project I did some years back, the Ariens RM lawn tractor. That machine bit the dust after staying in the weather, but the engine should be saveable.
I took the engine off both machines, and was about to swap the pulleys when I discovered the difference in axle diameter. That put the whole project on hold while I try to uncover a new or used pulley. Called around to different sellers, scrapyards, shops and private people to no real avail. The only lead was a chain of shops called TOOLS, that sells (amongst thousands of products) pulleys and bosses. Measuring, calling, re-measuring and what not the other day I finally bought a pulley and boss but man… the price was up there!
I am hoping to get going again this week on this project, but I have hurt my back pretty bad so I have to focus on my day job Mon-Fri. Hope the coming weekend is better, and that I have a possibility of working and filming the next steps.
Please have a look at the video (I’m still learning this type of filming) and comment and share with your friends. I have lot’s of video projects in mind 😉
So.. I have neglected this site for a very long time, but today I figured I’d post a quick one on the latest video I made. I got this project for free, all I had to do was hook up my trailer and go pick it up.
It wasn’t very far from me and the whole pickup took just over an hour from start to finish. I made this quick video and did a very quick diagnostic, looking at what it would need. Because of this whole Covid-19 thing, it’s very hard to get shipments into Norway (I’m still waiting on parts ordered months ago) and this made me think of flipping it.
I took some decent pictures and put it on Finn.no (sort of like Norways Craigslist). I got an offer of ~$120 and he wanted to pick up in an hour. I took it and told him to come. Two hours later, a no-show, and I contacted him back. Told me he couldn’t make it that night, but wanted to postpone to the next day. I said OK, but that I would need confirmation early the next day, to get a specific time.
Mid day, next day, I heard nothing from the first guy but had gotten another offer (better) so I called the first guy up. He was almost 10 hours away, on another pickup so he couldn’t make it that day either. I told him I had to let it go if he couldn’t make it but that I would sell it to him for the original offer if he could arrange pick up. He said he couldn’t and that I could sell to the next guy. Just over an hour later, the second guy showed up and we lifted it onto his trailer.
I got just over ~$160 for my trouble and I am putting that into finding a better starting point for a project. I still have active searches going and get notified every time there is something interesting given away for free.
I won’t say I make much money on stuff like this, but I find it refreshing every time I make a dime or two.
Saturday Jan. 27th, turned out to be quite the ordeal for a large number of PC users.
Malwarebytes pushed out a protection update that caused connection issues. Amongst problems with the web protection aspect, Malwarebytes caused a huge spike in memory usage, so much so the computers crashed.
I am personally a premium user of MBAM, and felt this thing hard. My computer started randomly spiking and crashing and kept on doing so for a couple of hours. I managed to finally get MBAM uninstalled and re-installed and I guess that happened around the time MBAM pushed out another protection update, which resolved the issue. Continue reading “Talking points Feb. 3”
So, I’m a new member on KeyPicking.com, and what a great forum that is! I ended up listing my TrioVing locks for trade, and today I received the first package. This is an American A1106BLU, and is my first IC (interchangeable core) padlock. I’m not sure if it’s currently 4 or 5 pin, but I had it picked in under a minute after opening the box. My tradesman included another pin (all parts) so I can make it more challenging when I feel up to it.
I’m currently struggling with one of my el-cheap-o locks, it just does not want to pick… I’ve opened it numerous times before, just now it’s decided to go bad on me. And just now, as I’m writing this, it finally decided to give. Gave up to a rake of all things.
On another note.. I need a bigger desk! I have a two screen setup, one 23″ and one 27″ monitor. I spend most of my time at this desk, but it’s getting more and more cramped. I guess I should keep my eyes on Finn.no, looking for a replacement. Keep ya’ll posted.