Welding!

The weather is warm, the back is … OK … and it’s time to weld!
I have done some research on my machine and on welding with shielding gas and felt that today is the day 😊 I grabbed a couple of thick pieces of steel and carried all the gear outside. And one thing is obvious to me now; I need a welding cart!!!!! Carrying the welder, gas and gear out and in all the time is a pain in the a%$!

The first thing was to try the welder, and I spent 10-15 minutes playing around with settings and welding. I could get penetration, but the “seam” was tall, and if I turned the welder over 2 (of 4) on the heat, the fuze kept breaking. I need a bigger circuit as well looks like.

I measured and cut a piece of steel for the first weld and tacked it in place. Adjusted the welder and actually think I did pretty well, for a first time in 20 years.

The second piece was actually a lot better and easier, and I think it looks alright 🤔
Both surfaces are now primed with anti-rust rattle can paint and gets a black coating tomorrow or something.

If I weren’t so knackered I’d take a drive and buy the cart tonight, but I think tomorrow is better even though it’s Whit weekend. Oh, and I need to find a good supply of steel. I pay between ~$50 and ~$60 for a sheet of 1m x 1m cold rolled 1mm steel. Pricey!

Nice little project

I don’t have to good photos or a finished product yet, but this is a quick and simple little project. It’s a way old garden rake, made from a metal plate and some nails. The nails are welded to the plate and it’s bent around a handle. One of the nails are broken and needs replacing.

An angle grinder, a drill and a bit and the scene is set. I don’t have a nail of the same size, but a simple normal nail is to be welded in place and cut and shaped to fit. I was supposed to weld it up today, but the weather is breaking out again and I will not be outside in the rain, welding. I WANT SOME 🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞🌞

New videos and a redneck fix

The mower is started and has been used to cut grass 😃 It runs great and cuts perfect. The only issue has been the throttle lever that’s busted off, but here is a quick (and sort of redneck) fix of that.

A drill, a drywall screw and a piece of epoxy putty, and 24 hours of curing. Problem solved.

https://youtu.be/4xgKrhA___0

Here is a video of this process and below is yesterdays upload of the starting and cutting of grass. The collection is working great and now the throttle lever is fixed. I think I might have to look at the drive, as it didn’t do the job all the while cutting, but I’ll have a look.

Afternoon project

A preface; I suffer from tough migraines, and today was not a good day. I did work my day job, but had to lie down after, to recoup. A couple of hours rest and I felt like doing a simple afternoon project.

A while back (before the big Covid outbreak) I picked up a kitchen table with extensions, to use as a work bench/surface. A couple of weeks back I also picked up a 1m x 1m sheet of cold rolled steel, to use in projects. Now, because of the new welder, I decided I wanted to have a metal surface/work bench to use as a welding table, and this was right in my mind. Had to cut a bit off the sheet, but an angle grinder and a cut off wheel did that job easy.

All in all I spent under 30 minutes on this, and now I have a great working surface to also weld on. The table can no longer “fold” together, but I don’t mind. Not in my use anyways.

Right now, I sitting here waiting for a confirmation on a new pickup it looks like I scored. It was listed for free, I jumped right on it, but the seller said it was gone in under a minute. Then, while working on the table, I got a message “He reconsidered and didn’t want it. You still interested?”. I answered Yes right away, but for almost an hour now there’s not been a confirmation. Might have to wait and pick up tomorrow, or I might have to pass as well ✋

Update;
Got the go-ahead to pick up the mower, an address about 25 minutes from me. Was told it was set outside the gate, and to just pick it up. Drove to where the GPS told me, but couldn’t find a house number and certainly no mower outside a gate. A BIG drive around to get back into this one way street, and by chance I saw a guy with a mower that matched the pictures… Stopped and sure enough, it was the one.

The guy told me it was one that was left at the house he bought, and that he had put fresh gas in it and pulled, but no luck. That’s fine and dandy and I can’t wait to dig in.
Now, tomorrow is Ascension Day, so no day job and probably no noisy work outside (no starting of mower) but I might just do some welding, because the weather has warmed up nice 😃

Done it

OK, now I’ve gone and done it…..
For years (ever since I was in school) I have made due with a simple flux core welder. It has been a pain in almost every way I’ve used it, but I just haven’t taken the plunge and bought a real welder. The bottom line has been gas (Argon) because the “bottles” have been crazy expensive.

A couple of weeks back, I found that a local warehouse (Jula) sells gas in a bottle they call Mini Bertha! 300bar 2500 liters of gas, and a bottle you own. All for the semi-nice price of ~$550 and when empty you exchange the whole thing for ~$100. That is a whole lot cheaper than the other places you get gas here. There you most of the time have to rent the bottles and keep up payments.

Now, I’m the proud owner of an ESAB Origo C141 MIG welder and a Mini Bertha with 2500+ liters of gas. That should hold me for a good while 😃

Next thing in that area now, is finding a supply of steel. I have a store that sells to private people, but I bought a sheet (1meter x 1meter) and it was ~$50! Along came some off-cut pieces I plan to use in installations I make (hobby) and some pieces were big enough to be used to fix other stuff. I have a lawnmower that needs a plate welded to it.


Under, you can view the video I made while rebuilding the garden trailer for my mother. I forgot to film the start of the project, which included the pain that was welding the mount.

This is a new (to me) way of filming and I am still learning the ropes. I promise to try my best at getting better, and I would very much like for you to visit my channel and get in on commenting, liking (or disliking) and of course subscribing to my uploads.

Garden equipment, rebuild

Yesterday (Saturday) we saw a nice break in the weather (for a while) and I decided to rebuild a garden carrier that my mother uses as a trailer behind an electric scooter. I should have done a video of the whole thing, but I got so worked up that it just slipped my mind. I’m not finished with the project, so I’m grabbing the camera today because we see good weather today as well and there’s enough work left to make a video.

I snapped some pictures right as I ended yesterday, because I had to go out and buy some new parts. The image on the lower right shows the chaos that was at Biltema (Scandinavian warehouse chain) and I actually had to park the car and walk the rest of the way there! On my way back home, the weather changed and we saw some surprise showers that ended the work outside for the day.

The problem with the “trailer” was that one of the wheel guides had broken clean off and needed to be welded back together. I only have a crappy flux core welder, and haven’t welded in many years, but I actually think I got it sorted well enough. (I’m saving up for a new and eons better welder, with shielding gas!)

I invested in a new welding helmet that has auto dark. All I’ve ever used prior is that type that’s always dark and you have to lift to see anything when not welding. I think it cost something like ~$45 (450NOK) and I a so pleased!! It did the job excellent and is now my go-to helmet.

Todays todo list is: New tires, handle swap and misc straightening. It’s Sunday so I don’t start until after 12:00, just because I have to make some noise doing this.