Getting better and doing some work

I have been thinking of a helping tool for my mother, to use in the garden. A tool to pull behind an electric scooter, that rakes the freshly cut grass.

Felt a little better today, and seeing as how there are no flea markets or sales to source flips, I decided to start this project. I had previously purchased two rakes and a plate that I cut to length. Normally I would have used hearing protection and I sort of did. I recently bought a pair of Levity Exosphere Fitness Premiums and wanted to try them out. Connected to iPod via Bluetooth and straight in the ear, no wires.

Worked so well, this is my new protection and also accompanying me when I’m sourcing, photographing, listing and packing up flips and other sales.

The rake is going to be heavy, and I have bought 8mm rebar to use as a shaft. It might be a little on the small side, seeing as I bought a 10mm thick, 100mm wide plate (about 800mm long) to fasten the two rake heads on. That thing is heavier than I thought it was. Tomorrow is Sunday, but I might try and get it finished (I’m about half done) after 12 some time. But it is hot outside, and I am struggling with some blood pressure issues, because of a change in medication. Wednesday I had a serious drop in blood pressure followed by a racing pulse. The doc came to our house to see me, and told me to take it slow and keep monitoring my BP. I am normally very stable at 120/80 and a pulse of around 70-80. Since Wed. I have measured anywhere from 124/75 down to 100/71 with pulse varying from 84 to almost 150!! That had me worried, but I got it back down later. I’m not going to work very hard in this warm weather, because of the issues, but I am flipping anything and everything I can.

I am trying to be more present on eBay, you can visit my page here. Lately I’m in a retro/vintage/bijoux/jewelry/silver mood and have listed some items in those categories.

I keep reading about other flippers going to garage- /yard sales and having ample venues to source their inventory. I; have the odd thrift shop and the free section on #FinnNO http://finn.no/ Don’t get me wrong, I have gotten great items from Finn, but lately not much has popped up in my area. Had to have driven a while to pick stuff up.

I can’t wait for this Covid-19 thing to be “over” and society gets back in action. I want to visit flea markets and for people to list back to normal again.

Clearing up outside and prepping some #art

It’s been raining for some days now, but finally stopped and the forecast is for better weather. It’s still to wet outside to do anything really, but it is drying up. Since I bought the new welder and gas tank and up until now, I have been lugging both things by hand (to my backs dismay) outside. Yesterday I figured: NO MORE! I have been looking at a welding cart online and finally went and bought it. It comes, assembly required, and I spent a good half hour on that yesterday morning. I was also struggling with a migraine but managed to pull through though.

I have started decorating my helmet with stickers, so if you have some you want to send me, I’d very much appreciate it! Get in touch: geir@geirandersen.com.

On the flip side, I got rid of a bike and let it go for ~$60. It was used like twice and then stored inside for years, so I just let it go. Haven’t picked up anything in days now, but I have started listing some items back on eBay again, link to my eBay store. I only wish shipping outside of Norway (and inside too…) wasn’t so expensive. It makes selling items to the world hard, because of the price.

Since I can’t go out welding, I have started thinking about projects I’m doing once I can, and today I started a project I thought of while in bed the other night. I struggle to sleep and often lay awake for hours before finally falling asleep. I don’t have too much material I can use yet, as I’ve just started thinking about these things, but I did pick up some stainless steel wire I wanted to use.

A clipper, a plier, a bolt and some wire – Turns into something winged.
I’m not sure I can manage to weld this up with my current skill level, but it sure will be fun to try 😆 . The wings are getting more embellishment also, but I won’t do that until the welder is out.

Got ideas for me? Leave me a comment below or send me an e-mail (address above).

Done it

OK, now I’ve gone and done it…..
For years (ever since I was in school) I have made due with a simple flux core welder. It has been a pain in almost every way I’ve used it, but I just haven’t taken the plunge and bought a real welder. The bottom line has been gas (Argon) because the “bottles” have been crazy expensive.

A couple of weeks back, I found that a local warehouse (Jula) sells gas in a bottle they call Mini Bertha! 300bar 2500 liters of gas, and a bottle you own. All for the semi-nice price of ~$550 and when empty you exchange the whole thing for ~$100. That is a whole lot cheaper than the other places you get gas here. There you most of the time have to rent the bottles and keep up payments.

Now, I’m the proud owner of an ESAB Origo C141 MIG welder and a Mini Bertha with 2500+ liters of gas. That should hold me for a good while 😃

Next thing in that area now, is finding a supply of steel. I have a store that sells to private people, but I bought a sheet (1meter x 1meter) and it was ~$50! Along came some off-cut pieces I plan to use in installations I make (hobby) and some pieces were big enough to be used to fix other stuff. I have a lawnmower that needs a plate welded to it.


Under, you can view the video I made while rebuilding the garden trailer for my mother. I forgot to film the start of the project, which included the pain that was welding the mount.

This is a new (to me) way of filming and I am still learning the ropes. I promise to try my best at getting better, and I would very much like for you to visit my channel and get in on commenting, liking (or disliking) and of course subscribing to my uploads.