Welding!

The weather is warm, the back is … OK … and it’s time to weld!
I have done some research on my machine and on welding with shielding gas and felt that today is the day 😊 I grabbed a couple of thick pieces of steel and carried all the gear outside. And one thing is obvious to me now; I need a welding cart!!!!! Carrying the welder, gas and gear out and in all the time is a pain in the a%$!

The first thing was to try the welder, and I spent 10-15 minutes playing around with settings and welding. I could get penetration, but the “seam” was tall, and if I turned the welder over 2 (of 4) on the heat, the fuze kept breaking. I need a bigger circuit as well looks like.

I measured and cut a piece of steel for the first weld and tacked it in place. Adjusted the welder and actually think I did pretty well, for a first time in 20 years.

The second piece was actually a lot better and easier, and I think it looks alright 🤔
Both surfaces are now primed with anti-rust rattle can paint and gets a black coating tomorrow or something.

If I weren’t so knackered I’d take a drive and buy the cart tonight, but I think tomorrow is better even though it’s Whit weekend. Oh, and I need to find a good supply of steel. I pay between ~$50 and ~$60 for a sheet of 1m x 1m cold rolled 1mm steel. Pricey!

Things are moving and some trapping

The rototiller project is officially: No more! I just sold the motor for a profit and I will re-list the tiller base a little later. The Gudenaa mower I picked for free also sold today, and is being picked up tomorrow. Now I have to get going welding up the other mowers I have!

Our property is infested with voles, mice and what-not; leaving tunnels and holes all over the place. We have just staked out some frequency oscillators that are supposed to help get rid of everything like this in the ground and surface. I also bought a couple of live traps that I’ve set out, but they have only caught 1 in 3 days. The latching mechanism needs adjusting or modifying, because the last two days the bait has been stolen and the traps were not set off.

https://youtu.be/QqhHhne0n0s

I have set the live catch traps, because I don’t mind relocating them in stead of destroying them. The one I have caught was released close to one of the oscillators, to see the effect. The mouse seemed to be disorientated and I guess that’s exactly what it’s supposed to do.

New videos and a redneck fix

The mower is started and has been used to cut grass 😃 It runs great and cuts perfect. The only issue has been the throttle lever that’s busted off, but here is a quick (and sort of redneck) fix of that.

A drill, a drywall screw and a piece of epoxy putty, and 24 hours of curing. Problem solved.

https://youtu.be/4xgKrhA___0

Here is a video of this process and below is yesterdays upload of the starting and cutting of grass. The collection is working great and now the throttle lever is fixed. I think I might have to look at the drive, as it didn’t do the job all the while cutting, but I’ll have a look.

Ascension Day quickie

Today is a quiet day, normally, and I am not playing with any motorized equipment. Had to do something though, so decided to assemble a work table I bought the other day. It’s one of those simple and small, raise/lower (manually), tables that has room for tools.

15 minutes and the thing was together, didn’t even need the guide 👅
One of our neighbors decided to start the chainsaw and do some yard work, and I figured what the heck.. I’ll pull on the recently added mower! I pulled twice to see that it turned and had compression and then primed the carb like 4 times. Two more pulls and the thing fired right up 🔥 Ran impressively clean and silent and the self propelling worked like a charm. All that’s really wrong is the gas lever is broken, but I have a quick fix for that in mind (video coming real soon).

Once I’ve cleaned out the grass and dirt that was in the mower and collector, and given it a nice power wash; I’ll list it for sale at like ~$110 or so and accept a tad lower if offered 💵

Afternoon project

A preface; I suffer from tough migraines, and today was not a good day. I did work my day job, but had to lie down after, to recoup. A couple of hours rest and I felt like doing a simple afternoon project.

A while back (before the big Covid outbreak) I picked up a kitchen table with extensions, to use as a work bench/surface. A couple of weeks back I also picked up a 1m x 1m sheet of cold rolled steel, to use in projects. Now, because of the new welder, I decided I wanted to have a metal surface/work bench to use as a welding table, and this was right in my mind. Had to cut a bit off the sheet, but an angle grinder and a cut off wheel did that job easy.

All in all I spent under 30 minutes on this, and now I have a great working surface to also weld on. The table can no longer “fold” together, but I don’t mind. Not in my use anyways.

Right now, I sitting here waiting for a confirmation on a new pickup it looks like I scored. It was listed for free, I jumped right on it, but the seller said it was gone in under a minute. Then, while working on the table, I got a message “He reconsidered and didn’t want it. You still interested?”. I answered Yes right away, but for almost an hour now there’s not been a confirmation. Might have to wait and pick up tomorrow, or I might have to pass as well ✋

Update;
Got the go-ahead to pick up the mower, an address about 25 minutes from me. Was told it was set outside the gate, and to just pick it up. Drove to where the GPS told me, but couldn’t find a house number and certainly no mower outside a gate. A BIG drive around to get back into this one way street, and by chance I saw a guy with a mower that matched the pictures… Stopped and sure enough, it was the one.

The guy told me it was one that was left at the house he bought, and that he had put fresh gas in it and pulled, but no luck. That’s fine and dandy and I can’t wait to dig in.
Now, tomorrow is Ascension Day, so no day job and probably no noisy work outside (no starting of mower) but I might just do some welding, because the weather has warmed up nice 😃