Done it

OK, now I’ve gone and done it…..
For years (ever since I was in school) I have made due with a simple flux core welder. It has been a pain in almost every way I’ve used it, but I just haven’t taken the plunge and bought a real welder. The bottom line has been gas (Argon) because the “bottles” have been crazy expensive.

A couple of weeks back, I found that a local warehouse (Jula) sells gas in a bottle they call Mini Bertha! 300bar 2500 liters of gas, and a bottle you own. All for the semi-nice price of ~$550 and when empty you exchange the whole thing for ~$100. That is a whole lot cheaper than the other places you get gas here. There you most of the time have to rent the bottles and keep up payments.

Now, I’m the proud owner of an ESAB Origo C141 MIG welder and a Mini Bertha with 2500+ liters of gas. That should hold me for a good while 😃

Next thing in that area now, is finding a supply of steel. I have a store that sells to private people, but I bought a sheet (1meter x 1meter) and it was ~$50! Along came some off-cut pieces I plan to use in installations I make (hobby) and some pieces were big enough to be used to fix other stuff. I have a lawnmower that needs a plate welded to it.


Under, you can view the video I made while rebuilding the garden trailer for my mother. I forgot to film the start of the project, which included the pain that was welding the mount.

This is a new (to me) way of filming and I am still learning the ropes. I promise to try my best at getting better, and I would very much like for you to visit my channel and get in on commenting, liking (or disliking) and of course subscribing to my uploads.

Garden equipment, rebuild

Yesterday (Saturday) we saw a nice break in the weather (for a while) and I decided to rebuild a garden carrier that my mother uses as a trailer behind an electric scooter. I should have done a video of the whole thing, but I got so worked up that it just slipped my mind. I’m not finished with the project, so I’m grabbing the camera today because we see good weather today as well and there’s enough work left to make a video.

I snapped some pictures right as I ended yesterday, because I had to go out and buy some new parts. The image on the lower right shows the chaos that was at Biltema (Scandinavian warehouse chain) and I actually had to park the car and walk the rest of the way there! On my way back home, the weather changed and we saw some surprise showers that ended the work outside for the day.

The problem with the “trailer” was that one of the wheel guides had broken clean off and needed to be welded back together. I only have a crappy flux core welder, and haven’t welded in many years, but I actually think I got it sorted well enough. (I’m saving up for a new and eons better welder, with shielding gas!)

I invested in a new welding helmet that has auto dark. All I’ve ever used prior is that type that’s always dark and you have to lift to see anything when not welding. I think it cost something like ~$45 (450NOK) and I a so pleased!! It did the job excellent and is now my go-to helmet.

Todays todo list is: New tires, handle swap and misc straightening. It’s Sunday so I don’t start until after 12:00, just because I have to make some noise doing this.